Damp Control - Cellar and basement waterproofing
John Newton - cellar and basement waterproofing Cellar and Basement Tanking
with Newton System 500


Cellar and Basement Tanking with Newton System 500 has revolutionised the way that below ground structures are treated for damp and water ingress. The internally drained cavity system has significant advantages over traditional hardened renders and externally applied systems.


  • No messy and costly substrate preparation works (sandblasting, brush hammering etc)
  • Is deemed as reversible so can be removed in the future if requested (wet tanking is not suitable for listed buildings)
  • Can be installed in all weather conditions
  • Can be installed with no wet trades meaning no dry out times
  • Can be tested to ensure it is working once installed (no other system can be)
  • Is easily repairable should the membrane be damaged by other trades
trade orders welcome
M2 Newton 508 clear
M2 - Newton 508 Clear

8mm Stud

SIZE: 2m x 20m Roll

£161.60
Add to Basket
Product Details
BBA newton 508
M3 Newton 508 mesh
M3 - Newton 508 Mesh

8mm Stud - Meshed membrane

SIZE: 2m x 20m Roll

£232.00
Add to Basket
Product Details
bba - newton 508 mesh
M11 Newton 503 mesh
M11 - Newton 503 Mesh

3mm Stud - Meshed membrane.
Where space is a premium.

SIZE: 2m x 20m Roll

£202.50
Add to Basket
Product Details
Newton Multiplug
A1 Newton Multiplug

Newton Multiplug has been engineered to give a better fix in questionable substrate. It has the added benefit of having a rubber sealing grommet supplied with the plug. In very poor substrate, a pin (supplied in bags of 100 at extra cost) is inserted into the plug that expands its outer circumference by nearly 2mm to tighten the plug into the substrate. The MultiPlug is pre-drilled to accept a size 10 (5mm) self-tapping screw for the fixing of battens or other dry-lining systems.

PACKAGE: 100 per bag

£40.00
Add to Basket
Product Details
Newton Nuseal Plug and Rope
Newton Nuseal Plug and Rope

Newton Nuseal Plugs are used to secure Newton Systems 500 membranes to building substrate and to fix battens or tracking systems. Prior to using Nuseal plugs, wrap a bead of Newton Waterseal Rope around the head of the plug to form a compression seal. Nuseal Plugs are recommended when applying Newton 508 or 508 Mesh to vaulted arches. Butyl rope in a 10mm bead is used for jointing membrane when a flange seal is not possible. Newton Waterseal Rope can be used with Newton 503 and Newton 508 Mesh.

Newton Nuseal Plug

PACKAGE: 100 per bag

£28.80
Add to Basket


Rope

PACKAGE: 30mm x 22.5m Roll

£28.80
Add to Basket
newton nuseal plug
Rope
Newton Waterseal Tape
A5 Newton Waterseal Tape

Butyl Tape used for jointing membrane along the flange Newton Waterseal Tape can be used with Newton 503, Newton 508, Newton 508 Mesh, Newton Geodrain and Newton Nu-Seal fixings.

PACKAGE: 30mm x 22.5m Roll

£33.60
Add to Basket
Product Details
Newton Overtape
A7 Newton Overtape

Black PVC backed one-sided tape used for connecting floor membranes to the Basedrain up-stand, Newton 520 to Newton 508, sealing abutting joints to Newton 503 and for repairs and reveal details. Roll is 20m long x 150mm or 100mm wide.

PACKAGE: 20mm x 150mm Roll

£41.60
Add to Basket
Product Details
N-Virol - Specialist Products - 2011 | Terms and Conditions | Condensation | Site by Capture